Projects that I have designed or built. I hope you find this information useful.
Coming Soon:
Arguing doug's
$5 Haunt Walls
Pneumatic doors
Computer controlled Alarm box
Halloween 2010 Animatronic Character
A DMX controlled Pneumatic, animatronic character for Halloween 2010.
3 Axis Pneumatic Arm
Details on how to build the 3 Axis Arm used in our haunt
Simple DMX Terminator/Tester
This is Terminator for DMX data chains the doubles as a tester and takes only a few minutes to make.
Self-contained Speaker system
This is simple, portable, loud, self-contained speaker system for halloween.
2011- 70 volt speaker
A Modular 70 volt speaker for use in our 2011 haunted house.
Simple 150 Yard FM transmitter
A Small and cheap FM audio transmitter for 150+ Yards.
Construction lights with an LED upgrade
Upgrading Orange construction lights with an LED flashing system.
Dual Laser Vortex DMX controlled
A DMX controlled dual Laser vortex, using green and violet lasers.
Kicking Hangman
Pneumatic Kicking Hangman for Halloween 2010.
4' portable black-light
This is a 4' CF black-light made for Halloween night that is run on 2, 9 volt batteries.
Homemade Fog Chiller
This is a Fog chiller that I use on halloween to make fog stick closer to the ground like you see in the horror
movies.
Programmable Relay Board
This page shows the last 3 versions of the relay board that i have built over the years. See below for the Version 4.0.
DMX Controlled relay board
This is a board I built that can be used to control halloween props or my christmas lights display,
It is controlled by DMX Signals and can be run from any DMX software (I will be using VSA)
DMX controller 8 channel light box
A DMX controlled 8 Channel SSR light controller, this can be used to make a pumpkin sing, or christmas lights dance to the music.
DMX Controlled Air valve controller
This board will be used to control pneumatic halloween props
It is 32 ports and will be controlled by DMX Signals.
DMX LED Wash Light
This LED light will be used to light halloween props, It will be an improvement over last years smaller lights
It is 3 channels (RGB) and will be controlled by DMX Signals sent from VSA.
Halloween 2011 Lighted Control Panel
A Microcontroller based Light panel for Alien scene.
PIC micro controlled LED Badge
A LED prop badge, for a haunted house, simulating a radiation detector.
Prop Gatling Gun
This gun will be used as a halloween props, It will be Either mounted or carried
It has six barrels and spins thanks to a drill motor.
Simple Servo Sender Board
This Makes wiring up a 3 axis skull or any servo, quick, easy, and neat.
Toxic Barrel Popper
This is a Prop i used for halloween, it runs on compressed air and pops up when the trigger is activated.
15 KV Jacobs Ladder
A 2 foot jacobs ladder, using a 15Kv NST. (halloween 2010)
Animated Christmas light display
My display for chrismas, using a relay board, (above) to control the lights i put in the yard or on the tree. this
year I decorated out christmas tree with 8 programmable channels of lights.
Robotics Page
Robotic platforms and projects.
LED lighting
A cheaper and better way to illuminate anything.
These are cheaper, last longer, and are energy efficent.
Long range wifi antenna
This is an antenna i built to extend the range of my wireless. It is small and foldable.