Fog chiller

The purpose of a fog chiller, is to cool fog from a fog machine to make it float close to the ground, instead of filling all the air around.
this can be used for halloween, movies, or just for fun. i got the parts from old machines, and a cooler. I cut one pipe for a better fit.
After fitting all pipes together I marked the holes to be cut on the cooler. I cut the holes out with a dremel tool and slide the pipes in
put it all together and It is done. i'll have photos of it running later.

This is the first test of the fog machine, the fog didn't sink right. It is suppose to stick close to the ground and as you can see its not doing that.

Once I finshed the first version of this, and ran a test I realized that the pipe wasn't moving enought cool air to the smoke and it wasn't sticking to the floor long enought.
I changed the design alittle bit and cut a pipe with my dremel tool, and added dryer duck to allow the fog more time to get colder and stick to the ground longer giving
me the effect i wanted.

Final Fog Test

Transport Wheelchair